- Vending Machine Pattern -
To save to computer - Right click / save as...
1. Color, detail, resize (if needed) as desired and print
2. Cover Vending Machine with clear packing tape and then cut out
3. Make a small balsa wood block to match the size of your Vending Machine
4. Using 'rubber cement' (Elmers may bleed threw), GOO is pretty good,
glue your Vending Machine picture around the block of wood
NOTE: Open front Brass frame may be used instead of wood
for frame if lighting (see below) your Vending Machine is desired.
- Phone Booth Pattern -
To save to computer - Right click / save as...
Phone Booth should be printed on CLEAR sheet plastic... the best is 'Overhead Projector' film
which can be bought at any type stationary store (Office Depot, Staples). Film can be bought for
Color Ink Jet or Laser printers (though I haven't tried the Ink Jet - don't know if it will smear).
1. Color, detail, resize (if needed) as desired and print on CLEAR film.
2. Paint inside "TELEPHONE" words and back of 'grey' panels flat white.
3. Cut out and, with a razor knife, LIGHTLY score all fold marks.
4. Fold into square with back panel "A" on the INSIDE of back panel "B"
5. Using clear 'tacky cement' (Elmers or 3M tacky cement),
glue your Phone Booth together.
6. Cut out "inside' panel "C" and glue inside of back
NOTE: For more realism & depth, Punch (stretch) phone
from back of insert panel before installing in booth.
